Constant Current Amplifier

A few days ago my friend came to the house, he shows the constant current amplifier schematics he found in http://www3.ocn.ne.jp/ ~ tima / products / ccamp / ccamp.html. We discuss and discuss until a few days. My friend kept us curious and eager to assemble.
Schematic Constant Current Amplifier Original
Schematic Constant Current Amplifier Modified


Modified schematic


I've assembled Constant Current Amplifier, but I do not really remember very well, probably from DIY Nelson Pass Zen. Constant Current Amplifier quite different from the single-ended Zen or its variants.

After reading and studying the sources of http://www3.ocn.ne.jp/ ~ tima / products / ccamp / ccamp.html and Hen experiment we finally managed to modify it by adding a few components.

In blind tests, the addition of these components produce a sound more amazing.

RX1 and CX1 form the LF filter. RX1 = 100 ohms and RCX1 = 1 nF. = 11 ohm RX2, RX3 = 0.22 ohm 5 Watt and CX2 = 100 nF

Assemble





I have a custom of using 2 Watt carbon resistor brands Phillips and my legs coated with tin WBT. I have done this long ago. I think the use of carbon 2 watt resistor produces a clear sound, more open and get a natural sound.

Therefore, I use a 2 watt resistor all unless otherwise specified.

For power supply I recommend to use A Simple Capacitance Multiplier Power Supply For Class-A Amplifiers Rod Elliott - ESP. I use a voltage source 21 Volts and 90 Volts.


Assemble survived.
(Hopefully in the next article I will discuss it in more detail)

7 comments:

  1. PC Richard and SonJune 21, 2012 at 6:18 PM

    Need for consists electricity everybody need this types of products. Really nice afford i like this idea . It is use for consuming power. Thanks for sharing.
    PC Richard

    ReplyDelete
  2. Manish KumarJuly 28, 2012 at 4:14 AM

    find force measurement type equipment to a variety of industries from imada.com. we have all king torque screwdriver, digital torque wrenches force measurement equipment. get more detail about us imada.com
    digital torque wrenches

    ReplyDelete
  3. sound system equipmentJuly 31, 2012 at 5:54 PM

    this is really useful..thanks for this amazing post..

    ReplyDelete
  4. UnknownAugust 4, 2012 at 5:11 AM

    It's really nice to read this topic.Wonderful information.
    GE Wall Oven PT970SRSS.

    ReplyDelete
  5. vicenteAugust 14, 2012 at 5:04 PM

    Very good content

    ReplyDelete
  6. PCB EtchingAugust 17, 2012 at 12:20 AM

    Excellent read, I just passed this onto a colleague who was doing a little research on that. And he actually bought me lunch because I found it for him smile So let me rephrase that.

    ReplyDelete
  7. www.swindonsilicon.co.uk/November 30, 2012 at 5:25 PM

    Brilliant post. I think there is a gap in the market for this type of equipment, but this company are really filling the brief.

    ReplyDelete